Jagoran Mataki na 6 don Kariyar Surge
Anan akwai matakai guda biyar don taimaka muku samar da mafi kyawun kariya ga fitilun LED ɗin ku.
1. Hayar ƙwararrun ƙwararrun ƙwararrun ƙwararrun masu aikin lantarki na iya gwada ƙazantattun kayan wutar lantarki kuma su ɗauki matakan da suka dace don kare tsarin wutar lantarki daga hawan jini. Yi magana da ma'aikacin wutar lantarki kuma ka tabbata an kiyaye ka.
2. Yi amfani da masu kariyar hawan hawan-saka masu kariya a duk da'irar haske. Don fitilun LED ɗin ku, akwai zaɓuɓɓuka masu kyau guda biyu don kariyar haɓakawa: jerin abubuwan kariya masu ƙarfi da kariya ta soket na photocell. Za a iya amfani da masu kariyar da aka saka don zaɓin LED daban-daban, gami da fitulun ruwa, fitilun masara, fitilun rufin LED, da sauransu. Ana shigar da su a cikin kewayen ku kafin a kunna fitilun LED, don haka suna da yawa a amfani da su. An tsara kariyar soket ɗin soket ɗin photocell don fitilun akwatin takalma na LED kuma yana amfani da soket ɗin hoto mai sauƙin murɗawa da kullewa. Ana murƙushe mai kariyar ƙura a wuri a cikin soket ɗin photocell, kuma an kulle photocell a wuri a saman mai kare hawan. Wannan kuma yana da sauƙi don maye gurbin lokacin da ake buƙatar maye gurbin mai karewa. Duk zaɓuɓɓuka biyu suna da arha kuma sun dace sosai don kare hasken LED.
3.Don't overload the circuit-wannan kuskure ne na kowa. Koyaushe tabbatar da cewa na'urar da na'urar suna toshe cikin madaidaicin wutar lantarki wanda yayi daidai da adadin wutar da suke buƙata. Tabbatar cewa kar a shigar da na'urorin lantarki da yawa akan da'ira ɗaya. Idan da'irar ta yi yawa fiye da kima, na'urar kashe wutar za ta iya yanke wutar da'irar, amma karu da ya rikiɗe na'urar na iya haifar da lahani marar lalacewa ga fitilun LED ɗin ku.
4. Zaɓi madaidaicin mai karewa-ba duk masu kariyar hawan jini aka tsara su don dacewa da kowane nau'in fitilu ko na'urori ba. Misali, masu kariyar hawan da aka yi amfani da su a cikin fitilun LED ba za su dace da na'urorin sanyaya iska ko firiji ba, kuma akasin haka. Wasu masu kariyar karuwa kuma sun haɗa da masu tacewa ko masu sarrafawa don taimakawa wajen magance dattin wutar lantarki.
5. Sauya mai kariyar karuwa akai-akai-ba za a yi amfani da mai karewa ba har abada. Yana da kyau a maye gurbin mai karewa a kowace shekara biyu. Ƙarƙara mai ƙarfi na iya zama ƙarshen kariya, don haka a shirya don maye gurbin su, musamman bayan sanannen babban karuwa. Yawancin ƙaramar wutar lantarki da yawa za su ƙare mai karewa, kuma lokacin da kuke buƙata, ƙila ba za su iya kare fitilun filin ajiye motoci na LED ɗinku ba.
6. Zaɓi fitilun LED tare da kariyar haɓaka haɓaka - masana'antun irin su Meanwell sun tsara wasu direbobin LED tare da kariyar haɓakawa. Wasu kwararan fitila na masara kuma suna da ginanniyar kariyar haɓaka. Sayi fitilun LED daga tushen da ke kiyaye kariyar karuwa a zuciya. Ko fitilar LED ce mai ginanniyar kariyar haɓakawa ko zaɓin kariya mai sauƙi don shigar, zaku iya amfani da su tare da fitilun LED ɗin su.